Call of Duty Community: resolve strict nat on thomson gateway for all systems

Up to Discussions in CoD: MW3 Wii

74168 Views 45 Replies Latest reply: Dec 27, 2012 9:18 PM by ZeToasters

bigalnkazz

8 posts since
Nov 18, 2011

Currently Being Moderated

Nov 18, 2011 11:51 AM

resolve strict nat on thomson gateway for all systems

first post hope this helps

This article shows you how to increase compatibility between the Thomson router and some multiplayer internet games, specifically those on the XBOX PS3 and wii.

If you are confronted with the error on your game that your connection NAT type is strict, then this will allow you to set it to open.

You will need to connect to the router via telnet.

If you have Windows 7 or Windows Vista then you will need to install the telnet application first.

To enable telnet go to control panel → programs and features→ turn windows features on and off, then tick the box next to telnet client and click OK. Windows will now spend a few minutes enabling this feature.

Once telnet is enabled you need to connect to the router.

Press the Windows Key (to the right of the Ctrl key) and R together.

In the run box that appears delete all the text and type telnet 192.168.1.254 and click OK.

You will now be asked for a username, enter your router username, this is usually admin.

You will now be asked for a password, enter your router password, this is usually the serial number and must be entered in capital letters.

You are now logged into the command line interface of the router.

Copy and paste the following commands into the window.

:connection unbind application=CONE(UDP) port=69 :connection unbind application=CONE(UDP) port=3074 :connection unbind application=CONE(UDP) port=3478-3479 :connection unbind application=CONE(UDP) port=88

These commands may produce an error, please ignore this if they do.

Now please copy and paste the following commands into the window. These should not produce an error, please let us know in the comments if they do.

:connection bind application=CONE(UDP) port=55-66 :connection bind application=CONE(UDP) port=68-499 :connection bind application=CONE(UDP) port=501-5059 :connection bind application=CONE(UDP) port=5061-7647 :connection bind application=CONE(UDP) port=7649-27009 :connection bind application=CONE(UDP) port=27012-65353

Assuming there were no errors, please restart your XBOX/PS3/PC/wii, and you should have no further problems with strict NAT.

Like (0)

Revisback
1,141 posts since
Sep 28, 2011

Currently Being Moderated

Nov 18, 2011 3:00 PM (in response to bigalnkazz)
Re: resolve strict nat on thomson gateway for all systems

My NAT is already Open

YEEEEEEEEEEEEEEEEEEEEEEEEAAAAAAAAAAAAA

Report Abuse

Like (0)
fmaedward
125 posts since
Jun 3, 2011

Currently Being Moderated

Nov 18, 2011 4:42 PM (in response to bigalnkazz)
Re: resolve strict nat on thomson gateway for all systems

Or you can port forward it.

Report Abuse

Like (0)
zoskia
1 posts since
Nov 18, 2011

Currently Being Moderated

Nov 18, 2011 6:41 PM (in response to bigalnkazz)
Re: resolve strict nat on thomson gateway for all systems

You rock! I tried so many things and now my NAT is finally open! Thanks

Report Abuse

Like (1)
- bigalnkazz
  8 posts since
  Nov 18, 2011
  
  Currently Being Moderated
  
  Nov 19, 2011 8:25 AM (in response to zoskia)
  Re: resolve strict nat on thomson gateway for all systems
  
  glad i could help and it works for all comps tryed port forwarding ect to no avail dont know what it was but never had a prob with black ops ect just this 1 but all running fine now
  
  Report Abuse
  
  Like (0)
romeo51
1 posts since
Nov 20, 2011

Currently Being Moderated

Nov 21, 2011 4:17 AM (in response to bigalnkazz)
Re: resolve strict nat on thomson gateway for all systems

Hi
Im using a Thomson TG585v8 and xbox 360. had open nat until the recent title update on MW3 now Ive a strict nat type. Ive also got a ps3 running mw2 with open nat type on same router? Ive followed the steps with telnet but when typing in the password for my router (usually the serial number) it says its incorrect and closes the connection. I have tried all the numbers on the base of the actual modem and case sensitive but no joy. An online search says that Thomson uses Administrator as the username and no password but this does not work either. Any ideas?

Report Abuse

Like (0)
- bigalnkazz
  8 posts since
  Nov 18, 2011
  
  Currently Being Moderated
  
  Nov 21, 2011 10:51 AM (in response to romeo51)
  Re: resolve strict nat on thomson gateway for all systems
  
  did u maybe change your password? if not reset router @ back will need a small pin this will put it back to factory settings and your password will now be back to your router serial num hope this helps same here havent had any probs with black ops ect just mw3 :-)
  
  Report Abuse
  
  Like (0)
- bigalnkazz
  8 posts since
  Nov 18, 2011
  
  Currently Being Moderated
  
  Nov 21, 2011 10:53 AM (in response to romeo51)
  Re: resolve strict nat on thomson gateway for all systems
  
  did u maybe change your password? if not reset router @ back will need a small pin this will put it back to factory settings and your password will now be back to your router serial num hope this helps same here havent had any probs with black ops ect just mw3 :-)
  
  Report Abuse
  
  Like (0)
- bigalnkazz
  8 posts since
  Nov 18, 2011
  
  Currently Being Moderated
  
  Nov 21, 2011 10:54 AM (in response to romeo51)
  Re: resolve strict nat on thomson gateway for all systems
  
  did u maybe change your password? if not reset router @ back will need a small pin this will put it back to factory settings and your password will now be back to your router serial num hope this helps same here havent had any probs with black ops ect just mw3 :-)
  
  Report Abuse
  
  Like (0)
PaulBishUK
50 posts since
Nov 30, 2011

Currently Being Moderated

Nov 30, 2011 10:39 AM (in response to bigalnkazz)
Re: resolve strict nat on thomson gateway for all systems

Hi can you help! I followed your instructions above in going through windows and telnet to open up my nat type, i have a thomson speedtouch st585v6sl and at first Great it worked! however when shutting down my wii and going back on 2 nights later my nat type was strict again!!! i have sne tried the same process over and over but my nat type remains strict!

now do i really need to have open or moderate to enjo this game as I dont have issues playing people on line, i still see that 7000 people are on line which most people say is the number at present, and if thi is problem can it b solved or will i need to invest in a new router? i have had this router now for several years since going wireless! please help its frustrating that i may be missing out on quicker match making r other issues, how ever as things stand if moving to moderate or open mean i have a chance of host here in the UK then i'd rather remain on stricy nat type!

Report Abuse

Like (0)
- pauly01
  3,769 posts since
  Sep 21, 2011
  
  Currently Being Moderated
  
  Nov 30, 2011 10:55 AM (in response to PaulBishUK)
  Re: resolve strict nat on thomson gateway for all systems
  
  Ok, I can't help you on how to adjust your settings but here's my experience. I'm UK too, my nat is mostly open on a relatively slow, but usable internet. Sometimes my router nat will change to moderate by itself. I have no idea why, but it happens. Now, I read in another post that someone thinks you should go for a moderate setting, mainly to avoid being host, but I never get host, but have noticed that when nat is open, my games suffer badly, like everyone seems to be a few seconds ahead all the time. When its on moderate, i'll have good games and enjoy it much more. So if this is true, and you know how to do it, I would go for the moderate settings. Hope this makes sense for you..
  
  Report Abuse
  
  Like (0)
  - PaulBishUK
    50 posts since
    Nov 30, 2011
    
    Currently Being Moderated
    
    Nov 30, 2011 11:11 AM (in response to pauly01)
    Re: resolve strict nat on thomson gateway for all systems
    
    Hi Pauly01, thanks for responding at least, to be honest at nearly 40 i should maybe have an idea how my router does or does no work but i dont, it was not until Bigalnkezz posted the above on how to open did I attemot to change my router, also on Bops when they advised to port forward I had no issues and all was fine on that COD title in playing world wide but MW3 is different!
    
    I have been chatting a moment ago with Beastblood uk and he seems to think it might be my IS provider AOL and a change of ISP and a newer router may solve this strict type NAT! to be honest on strict I nevr host apart from on special ops, and i do not have any of the issues so many people have talked about in Lag, yes sometimes I feel that i'm a few seconds behind on some games and get owned big time but i wait till the game is over and enter another lobby and it seems to solve itself! I think the appeal of an open NAT type is quicker match making and if this opens me up to playing with more people!
    
    This i hope will be solved if they patch the alley system and I can send invites and have some allies to play! look out for me here in the UK around 10pm -2am most nights (BishBosh}{e// UK thanks again maybe Bigalnkezz will respond as he/she seems quite tecky!
    
    Report Abuse
    
    Like (0)
    - pauly01
      3,769 posts since
      Sep 21, 2011
      
      Currently Being Moderated
      
      Nov 30, 2011 11:49 AM (in response to PaulBishUK)
      Re: resolve strict nat on thomson gateway for all systems
      
      PaulBishUK wrote:
      
      Hi Pauly01, thanks for responding at least, to be honest at nearly 40 i should maybe have an idea how my router does or does no work but i dont,
      
      I think the appeal of an open NAT type is quicker match making and if this opens me up to playing with more people!
      
      I'm 48 and know nothing about how a router works. lol.
      Why don't you give OFC clan a look on overfortyclan.freeforums.org
      We're a layed back clan that play for fun and have no tryouts or minimum kdr requirements. At least give us a look and see what you think. Also, we use a teamspeak communication on our laptops/pc's. Look forward to seeing you there if you decide to come along..
      
      Report Abuse
      
      Like (0)
Rahvin24
1 posts since
Oct 29, 2011

Currently Being Moderated

Dec 2, 2011 5:25 AM (in response to bigalnkazz)
Re: resolve strict nat on thomson gateway for all systems

YOU SIR ARE A LEGEND!!!

THANKYOU IT WORKED FINALLY

Report Abuse

Like (0)
Cartec1001
1 posts since
Dec 29, 2011

Currently Being Moderated

Dec 29, 2011 2:27 PM (in response to bigalnkazz)
Re: resolve strict nat on thomson gateway for all systems

Help The User And Password In "cmd" Always Sais Invalid Username/Password Closing Connection Connection To Host Lost Please Help

Report Abuse

Like (0)
darkshark1
2 posts since
May 13, 2012

Currently Being Moderated

May 13, 2012 9:55 AM (in response to bigalnkazz)
Re: resolve strict nat on thomson gateway for all systems

Thanks man .totally working 100% now my nat is open ,was trying to open the nat for sooooo long time nothing was working but with ur post i finally made it! god bless you man and only took me 1 minute !

Report Abuse

Like (0)
darkshark1
2 posts since
May 13, 2012

Currently Being Moderated

May 13, 2012 10:04 AM (in response to bigalnkazz)
Re: resolve strict nat on thomson gateway for all systems

Thanks man .totally working 100% now my nat is open ,was trying to open the nat for sooooo long time nothing was working but with ur post i finally made it! god bless you man and only took me 1 minute !

Report Abuse

Like (0)
- BEAS7BLOOD
  2,258 posts since
  Sep 30, 2011
  
  Currently Being Moderated
  
  May 13, 2012 11:12 AM (in response to darkshark1)
  Re: resolve strict nat on thomson gateway for all systems
  
  If only you could sort my sagem sky router
  
  Report Abuse
  
  Like (0)
  - like2nap03
    2,538 posts since
    Jan 17, 2012
    
    Currently Being Moderated
    
    Jul 3, 2012 7:26 PM (in response to BEAS7BLOOD)
    Re: resolve strict nat on thomson gateway for all systems
    
    Did you see and try that forum link I posted on here for you a while back? It was a forum about those routers and how to customize them.
    
    Report Abuse
    
    Like (0)
    - s7ra1gh7upb3as7
      2,718 posts since
      Sep 24, 2011
      
      Currently Being Moderated
      
      Sep 1, 2012 6:42 AM (in response to like2nap03)
      Re: resolve strict nat on thomson gateway for all systems
      
      Yeah, didnt work pal
      
      Report Abuse
      
      Like (0)
Roberts05
2 posts since
Jun 2, 2012

Currently Being Moderated

Jun 2, 2012 9:16 PM (in response to bigalnkazz)
Re: resolve strict nat on thomson gateway for all systems

Is there any way i can undo this? I did it and now everytime i try to connect to the internet on my ps3 it says 'connection to ip address timed out' or something.

Report Abuse

Like (0)
- thepenguinz
  2,303 posts since
  Sep 21, 2011
  
  Currently Being Moderated
  
  Jun 2, 2012 9:28 PM (in response to Roberts05)
  Re: resolve strict nat on thomson gateway for all systems
  
  you can just remove the ports you open from your router and restart it
  
  Report Abuse
  
  Like (0)
  - Roberts05
    2 posts since
    Jun 2, 2012
    
    Currently Being Moderated
    
    Jun 2, 2012 9:45 PM (in response to thepenguinz)
    Re: resolve strict nat on thomson gateway for all systems
    
    i don't know how to do that..
    
    Report Abuse
    
    Like (0)
thryme79
96 posts since
Sep 6, 2011

Currently Being Moderated

Jul 2, 2012 10:36 PM (in response to bigalnkazz)
Re: resolve strict nat on thomson gateway for all systems

All I got was failed to delete on the first one and then unknown command on the rest.Any help please?

Report Abuse

Like (0)
sovietcookie
1,728 posts since
Feb 11, 2012

Currently Being Moderated

Jul 2, 2012 11:00 PM (in response to bigalnkazz)
Re: resolve strict nat on thomson gateway for all systems

I've always had open since day 1. Even when I'm downloading the world, I still have open.

Report Abuse

Like (0)
like2nap03
2,538 posts since
Jan 17, 2012

Currently Being Moderated

Jul 3, 2012 1:00 AM (in response to bigalnkazz)
Re: resolve strict nat on thomson gateway for all systems

Anyone know how to get an open NAT with an MBR900 or MBR95 router and a pantech UML290 modem in 4G mode. I already know how to do it with 3G. Got it to moderate with 4G but no dice on Open.

Report Abuse

Like (0)
theVSionX
282 posts since
May 5, 2012

Currently Being Moderated

Jul 3, 2012 6:04 AM (in response to bigalnkazz)
Re: resolve strict nat on thomson gateway for all systems

ALLELUYAH!!!!!!!!!!!!!!!!!!!! MY NAT TIPE WAS ALWAYS MODERATE AND STRICT NOW IS OPEN

Report Abuse

Like (0)
Chetnik95
424 posts since
May 25, 2012

Currently Being Moderated

Jul 3, 2012 7:43 AM (in response to bigalnkazz)
Re: resolve strict nat on thomson gateway for all systems

To be honest, I never get Strict NAT Type. So I don't need to worry.

Report Abuse

Like (1)
Blackop2fan
292 posts since
May 1, 2012

Currently Being Moderated

Jul 3, 2012 12:11 PM (in response to bigalnkazz)
Re: resolve strict nat on thomson gateway for all systems

Ack X! Computer content. I can no do this.

Report Abuse

Like (0)
thryme79
96 posts since
Sep 6, 2011

Currently Being Moderated

Jul 3, 2012 5:17 PM (in response to bigalnkazz)
Re: resolve strict nat on thomson gateway for all systems

All I got was failed to delete on the first line and then unknown command on the rest. Any help please?

Report Abuse

Like (1)
VampWolfy
1,092 posts since
Nov 28, 2011

Currently Being Moderated

Jul 4, 2012 7:16 AM (in response to bigalnkazz)
Re: resolve strict nat on thomson gateway for all systems

I heard deleting System 32 changed your NAT type to Perfect

Report Abuse

Like (0)
MUSTAFA213
1 posts since
Jul 15, 2012

Currently Being Moderated

Jul 15, 2012 6:11 PM (in response to bigalnkazz)
Re: resolve strict nat on thomson gateway for all systems

AM GETTING THIS ERROR

{Administrator}=>:connection unbind application=CONE(UDP) port=69
Failed to delete CONN binding.
{Administrator}=>:connection unbind application=CONE(UDP) port=3074
Failed to delete CONN binding.
{Administrator}=>:connection unbind application=CONE(UDP) port=3478-3479
Failed to delete CONN binding.
{Administrator}=>:connection unbind application=CONE(UDP) port=88
Failed to delete CONN binding.

failed at the end .....

please help me

Report Abuse

Like (0)
erikos99
3 posts since
Jul 6, 2012

Currently Being Moderated

Aug 30, 2012 11:38 PM (in response to bigalnkazz)
Re: resolve strict nat on thomson gateway for all systems

when the run box appeared i typed telnet 192.168.1.254 (having telnet client enable) and then clicked OK.After that a black box appeared telling connecting to 192.168.1.254 and then it disappeared and nothing happened.I am stuckkkkkkkkkkkk.HELP ME.

Report Abuse

Like (0)
erikos99
3 posts since
Jul 6, 2012

Currently Being Moderated

Aug 30, 2012 11:39 PM (in response to bigalnkazz)
Re: resolve strict nat on thomson gateway for all systems

when the run box appeared i typed telnet 192.168.1.254 (having telnet client enable) and then clicked OK.After that a black box appeared telling connecting to 192.168.1.254 and then it disappeared and nothing happened.I am stuckkkkkkkkkkkk.HELP ME.

Report Abuse

Like (0)
erikos99
3 posts since
Jul 6, 2012

Currently Being Moderated

Aug 30, 2012 11:40 PM (in response to bigalnkazz)
Re: resolve strict nat on thomson gateway for all systems

when the run box appeared i typed telnet 192.168.1.254 (having telnet client enable) and then clicked OK.After that a black box appeared telling connecting to 192.168.1.254 and then it disappeared and nothing happened.I am stuckkkkkkkkkkkk.HELP ME.

Report Abuse

Like (0)
karim_raymone
4 posts since
Aug 19, 2012

Currently Being Moderated

Sep 3, 2012 1:46 PM (in response to bigalnkazz)
Re: resolve strict nat on thomson gateway for all systems

iv sort of got a problem, my laptop's broken and my sister uses a mac, but my mom's laptop is windows xp, is there a way for me to do it via xp?

Report Abuse

Like (0)
Jiinx72
1 posts since
Sep 27, 2012

Currently Being Moderated

Sep 27, 2012 11:17 AM (in response to bigalnkazz)
Re: resolve strict nat on thomson gateway for all systems

Hey Bud.
Did this last night. It worked, had open NAT all night. I gather this is meant to stay Open NAT all the time??? or do you need to redo everytime before I fire up my PS3?. Reason why I ask is the NAT went straight back to stricked this morining. Not so much of an issue to keep doing his prior to MW3 but it would be nice to turn on my PS3 and not see those horrid red letters again.

Report Abuse

Like (0)
sutakas
62 posts since
Sep 6, 2012

Currently Being Moderated

Sep 28, 2012 10:08 AM (in response to bigalnkazz)
Re: resolve strict nat on thomson gateway for all systems

It worked one week, but today my NAT again turned to STRICK. Daaaamn!!

Report Abuse

Like (0)
hokojordan
4 posts since
Aug 26, 2012

Currently Being Moderated

Oct 12, 2012 7:45 PM (in response to bigalnkazz)
Re: resolve strict nat on thomson gateway for all systems

how do you reverse this and change it back to normal. because now i cant sign in and having all kinds of troubles?

Report Abuse

Like (0)
hokojordan
4 posts since
Aug 26, 2012

Currently Being Moderated

Oct 12, 2012 7:48 PM (in response to bigalnkazz)
Re: resolve strict nat on thomson gateway for all systems

how do you reverse this and change it back to normal. because now i cant sign in and having all kinds of troubles?

Report Abuse

Like (0)
hokojordan
4 posts since
Aug 26, 2012

Currently Being Moderated

Oct 12, 2012 7:49 PM (in response to bigalnkazz)
Re: resolve strict nat on thomson gateway for all systems

how do you reverse this and change it back to normal. because now i cant sign in and having all kinds of troubles?

Report Abuse

Like (0)
hokojordan
4 posts since
Aug 26, 2012

Currently Being Moderated

Oct 12, 2012 7:50 PM (in response to bigalnkazz)
Re: resolve strict nat on thomson gateway for all systems

how do you reverse this and change it back to normal. because now i cant sign in and having all kinds of troubles?

Report Abuse

Like (0)
zoomalk
1 posts since
Nov 17, 2012

Currently Being Moderated

Nov 17, 2012 12:49 AM (in response to bigalnkazz)
Re: resolve strict nat on thomson gateway for all systems

when the run box appeared i typed telnet 192.168.1.254 (having telnet client enable) and then clicked OK.After that a black box appeared telling connecting to 192.168.1.254 and then it disappeared and nothing happened.Help plzzzz

Report Abuse

Like (0)
danielcota
1 posts since
Dec 19, 2012

Currently Being Moderated

Dec 19, 2012 9:02 PM (in response to bigalnkazz)
Re: resolve strict nat on thomson gateway for all systems

i get Failed to create conn biding when i enter :connection bind application=CONE(UDP) port=68-499

Report Abuse

Like (0)
- MadHouseSRB
  496 posts since
  Jun 27, 2012
  
  Currently Being Moderated
  
  Dec 23, 2012 2:56 AM (in response to danielcota)
  Re: resolve strict nat on thomson gateway for all systems
  
  I used the method where i put my wii's ip address into Apps n Gaming - DMZ.
  
  It works.
  
  Report Abuse
  
  Like (0)
ZeToasters
1 posts since
Dec 27, 2012

Currently Being Moderated

Dec 27, 2012 9:18 PM (in response to bigalnkazz)
Re: resolve strict nat on thomson gateway for all systems

Yeah thanks! but I have to do it like every day or it won't work... Is there another was of doing it with out doing the same thing every day?

Report Abuse

Like (0)

Go to original post

Nov 18, 2011 11:51 AM

resolve strict nat on thomson gateway for all systems

Actions

Bookmarked By (0)